With a high-speed Si3N4 Hybrid Ceramic Bearing that provides fast smooth easy fidgeting and long spin times that will impress your friends.
Injection molded ABS plastic that will not break when dropped, unlike 3D printed alternatives. Removable bearings and caps, for customization, that will not fall out easily when dropped.
To be a part of your everyday carry and fit nicely in all hand sizes. Kids to adults will enjoy the comfort dimpled center cap and compact size.
For those suffering from ADD, ADHD, Anxiety, and Autism. Smooth rounded edges for one-handed operation using your fingers to spin while you work, relax, or play.
While you relieve stress at school or the office without disrupting anyone around you. Eliminate boredom and stop bad habits such as nail biting, pen clicking, and knuckle cracking.
Take the spinner in any hand and use the other hand to spin it fast making short continuous hits to keep it spinning endlessly. For one-hand usage put it in a hand and use your fingers to start or stop spinning.
Impact or fall may cause damage! Keep out of reach of children.
What kind of bearings does it have?
The Gadget World Spinner has a Hybrid Ceramic Si3N4 bearing in the center. Hybrid ceramic ball bearings use a combination of traditional steel rings precision matched with ceramic balls. This gives it the ability to spin for longer than 2 minutes plus feels amazing in your hands.
How big is the Gadget World spinner?
The Gadget World Spinner is 3.25 inches in diameter. From the center to the outer edge is 1.625 inches. This fits well on all hand sizes even if you have a smaller hand. You can edge your thumb and pointer finger to the outer edge of the center cap to gain another 1/4 inch of room.
Dose the bearings come off?
This is the original spinner design, the bearings are assembled not welded into the frame, they are tightly fitted, if the spinner falls hard on the ground they might slightly come off, all you have to do is put them back in place. You can customize your spinner by exchanging the outer bearings, create your own combination of colors. They are also weights to give the spinner long spins and special characteristics to how it feels in your hands. In normal usage the bearings does not come off easily.
Can I use the spinner without the center caps?
Avoid removing the center caps because the ceramic balls may fall out and the center bearing may get dirty and may come off.
Does it make noise when spinning?
The Gadget World spinner does not make a lot of noise, when the spinner is spinning in normal speed it is almost silent. If you hold the spinner and move it around obviously it will make noise, it depends on how you use it, and also it depends on how old the spinner is and how clean it is.
How do I take care of my spinner?
Can I add oil to the center bearing? Is it going to improve it?
This is one of the most common questions, you can make your fidget spinner quiet by adding a drop of all purpose machine oil. You can find machine oil in the sewing machine aisle at your local store. Take the center caps off of the bearing. Use one small drop of machine oil on one of the balls in the bearing. Spin the bearing to get the oil on all of the balls in the bearing. Put the center caps back on and spin away. Note that putting oil in your bearing will reduce your spin time but will make it quieter. Dry bearings allow for longer spin times, oiled bearings create quieter spins.
Why are there very low-cost spinners in the market?
It depends on the quality, spinners with steel bearings have low cost and low quality frame. The Gadget World spinner designed not to just have long spinning time, but also to feel amazing when you are spinning and fidgeting. The following image explains each component of the Gadget World Spinner: